☰
UNITING FAITH & SCIENCE FOR 25+ YEARS
Thermo Scientific 50132133 Water Pacific TII 7 LPM
- 90 to 240 volts, 50/60 hertz — Product no longer available — Thermo Scientific recommends suggested replacement
Description
- Convert tap water into Type 2 high purity water with the automatic and cost-efficient Thermo Scientific Barnstead Pacific TII Water Purification System.
- This system supports daily requirements from 20 to 200 liters.
- Remove approximately 98% of inorganic ions and 99% of all dissolved organic substances as well as microorganisms and particles with the high performance reverse osmosis membrane.
Multiple options for Type 2 water:
- Five system options with permeate flows of 3, 7, 12, 20 or 40L/hr.
- Future system upgrades accommodate greater capacities to meet growing water demands.
- Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket.
Operational reliability:
- Microprocessor controlled for automatic operation with continuous monitoring of all critical parameters.
- Automatic return to “operating” mode ensures recirculation during standstill periods.
- UV lamp prevents biological contamination (UV models only).
Easy-to-operate:
- Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
- Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” modes.
- Reservoir fill-level shown as %.
- System parameters are code-protected to prevent accidental changes to set points.
GLP-Compliant documentation:
- Optional printer connects to RS-232 port for data recording and traceability.
- Cell constant of 0.01cm-1 ensures precise conductivity measurements.
- Temperature compensation for the conductivity measurement has an accuracy of ±0.1°C (in conformity with USP 645).
Optional Hand Dispenser:
- Gain increased flexibility by adding a hand dispenser with 3 meter cord which connects to tank. Use only with a tank equipped with a pressure pump (06.5032, 06.5062, 06.5082).
- Ships with a 0.2 micron final filter. (Part #50138221).
Warranty:
Specification
| Product Size |
Each |
| Resistivity |
10 to 1MO·cm at 25°C |
| Conductivity |
0.1 to 1.0µS/cm |
| Feedwater Source |
tap |
| Flow Rate |
7L/hr at 10°C |
| Total Organic Carbon |
<30ppb |
| Bacterial Content |
99% |
| Particles >0.2µM/mL |
<1 µM/mL |
| TOC Monitor with UV Intensity Monitoring |
No |
| Feed Water Monitoring |
No |
| Feedwater Connector |
3/4 in. NPT |
| Feedwater Pressure |
1-6 Bar |
| Height (Metric) |
613mm |
| Width (Metric) |
372mm |
| Length (Metric) |
330mm |
| Net Weight (Metric) |
25kg |
| Operating Pressure |
2 to 6 bar |
| Voltage |
90 to 240V |
| Hertz |
50/60Hz |
| Temperature Range (Metric) |
2° to 35°C |
| Bacterial retention |
99% |
| Description |
Pacific TII 40 (UV) |
| Permeate performance |
7L/hr. at 10°C |
| Electrical Requirements |
90 to 240V 50/60Hz |
