Ideal for safe operation with a range of applications including annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples.
Product Selection
Model Control Certifications / Compliance Capacity Electrical F30428C B1 CSA Approved 1.6 cu. ft., 45L 208V 50/60Hz F30420C B1 CSA Approved 1.6 cu. ft., 45L 240V 50/60Hz F30420C-33 B1 CSA Approved | CE Marked 1.6 cu. ft., 45L 240V 50/60Hz F30428C-80 C1 CSA Approved 1.6 cu. ft., 45L 208V 50/60Hz F30420C-80 C1 CSA Approved 1.6 cu. ft., 45L 240V 50/60Hz F30420C-33-80 C1 CSA Approved | CE Marked 1.6 cu. ft., 45L 240V 50/60Hz F30438CM D1 CSA Approved 1.6 cu. ft., 45L 208V 50/60Hz F30430CM C1 CSA Approved 1.6 cu. ft., 45L 240V 50/60Hz F30430CM-33 D1 CSA Approved | CE Marked 1.6 cu. ft., 45L 240V 50/60Hz
Description
- Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific Thermolyne Largest Tabletop Muffle Furnace.
- Designed for safe operation, these furnaces are available in three temperature control models.
- They are ideal for annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples.
Features
- Advanced LED digital-set/digital-display temperature controller is microprocessor-controlled.
- LED display simultaneously shows both setpoint and actual furnace temperatures in °C or °F.
- User-selectable overtemperature protection.
- Open thermocouple protection.
- Adjustable power output from 1 to 100%.
Safety and Design Features
- Heating elements are on chamber top, bottom and sides for enhanced temperature uniformity.
- Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit.
- Rear of chamber incorporates a 0.95cm (0.38in.) diameter port for monitoring chamber temperatures with independent measuring devices.
- Critical electronic components and heating elements are protected by a 35A circuit breaker.
- Door safety switch stops power to the heating elements when door opens.
Choice of Temperature Controllers
- Furnaces that use B1, C1 or D1 control also use a mechanical Overtemperature Protection relay.
- B1: Digital single setpoint control with a single ramp to setpoint and dwell; single display shows actual temperature or setpoint.
- C1: Digital programmable control with one stored program of 8 segments.
- D1: Digital programmable control with 4 stored programs, 16 segments per program, and RS-232 communications interface.
Includes
- Two refractory shelves.
Requires
- Electrical connection requires fixed wiring (no power cord).
Recommended for
- Annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples.
Document
