Ideal for safe operation with a range of applications including annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples.

Product Selection

Model Control Certifications / Compliance Capacity Electrical
F30428C B1 CSA Approved 1.6 cu. ft., 45L 208V 50/60Hz
F30420C B1 CSA Approved 1.6 cu. ft., 45L 240V 50/60Hz
F30420C-33 B1 CSA Approved | CE Marked 1.6 cu. ft., 45L 240V 50/60Hz
F30428C-80 C1 CSA Approved 1.6 cu. ft., 45L 208V 50/60Hz
F30420C-80 C1 CSA Approved 1.6 cu. ft., 45L 240V 50/60Hz
F30420C-33-80 C1 CSA Approved | CE Marked 1.6 cu. ft., 45L 240V 50/60Hz
F30438CM D1 CSA Approved 1.6 cu. ft., 45L 208V 50/60Hz
F30430CM C1 CSA Approved 1.6 cu. ft., 45L 240V 50/60Hz
F30430CM-33 D1 CSA Approved | CE Marked 1.6 cu. ft., 45L 240V 50/60Hz

Description

  • Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific Thermolyne Largest Tabletop Muffle Furnace.
  • Designed for safe operation, these furnaces are available in three temperature control models.
  • They are ideal for annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples.

Features

  • Advanced LED digital-set/digital-display temperature controller is microprocessor-controlled.
  • LED display simultaneously shows both setpoint and actual furnace temperatures in °C or °F.
  • User-selectable overtemperature protection.
  • Open thermocouple protection.
  • Adjustable power output from 1 to 100%.

Safety and Design Features

  • Heating elements are on chamber top, bottom and sides for enhanced temperature uniformity.
  • Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit.
  • Rear of chamber incorporates a 0.95cm (0.38in.) diameter port for monitoring chamber temperatures with independent measuring devices.
  • Critical electronic components and heating elements are protected by a 35A circuit breaker.
  • Door safety switch stops power to the heating elements when door opens.

Choice of Temperature Controllers

  • Furnaces that use B1, C1 or D1 control also use a mechanical Overtemperature Protection relay.
  • B1: Digital single setpoint control with a single ramp to setpoint and dwell; single display shows actual temperature or setpoint.
  • C1: Digital programmable control with one stored program of 8 segments.
  • D1: Digital programmable control with 4 stored programs, 16 segments per program, and RS-232 communications interface.

Includes

  • Two refractory shelves.

Requires

  • Electrical connection requires fixed wiring (no power cord).

Recommended for

  • Annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples.

Document

Thermo Scientific Thermolyne Largest Tabletop Muffle Furnace Product Brochure Product Brochure