Fast heatup and excellent energy efficiency — ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting gravimetric analysis and for the determination of volatile and suspended solids.
Product Selection
Model Certifications / Compliance Control Capacity Electrical FB1315M CSA Approved A1 0.04 cu. ft., 1.3L 120V 50/60Hz FB1318M CSA Approved A1 0.04 cu. ft., 1.3L 208V 50/60Hz FB1310M CSA Approved A1 0.04 cu. ft., 1.3L 240V 50/60Hz FB1310M-33 CSA Approved | CE Marked A1 0.04 cu. ft., 1.3L 240V 50/60Hz FB1415M CSA Approved A1 0.07 cu. ft., 2.1L 120V 50/60Hz FB1418M CSA Approved A1 0.07 cu. ft., 2.1L 208V 50/60Hz FB1410M CSA Approved A1 0.07 cu. ft., 2.1L 240V 50/60Hz FB1410M-33 CSA Approved | CE Marked A1 0.07 cu. ft., 2.1L 240V 50/60Hz
Description
- Reduce energy consumption and increase heatup time with Thermo Scientific Thermolyne Benchtop 1100°C Muffle Furnaces.
- The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting gravimetric analysis and for the determination of volatile and suspended solids.
Features
- Available in two capacities.
- Digital single setpoint temperature control to 1100°C.
- Single display shows actual temperature or setpoint.
- Ceramic fiber insulation permits faster heatup, reducing energy consumption.
- Embedded heating element on top and both sides improves temperature uniformity.
- Drop-down door doubles as a shelf for loading and unloading.
- Door safety switch stops power to heating elements when door is opened.
- Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition.
- 0.95cm (0.38in.) dia. port in chamber rear for monitoring temperatures with independent measuring devices.
Temperature Controllers
- A1: Digital single setpoint control; single display shows actual temperature or setpoint.
Ordering Information
- Accessory heating elements and thermocouples available separately.
Temperature Controller
- A1: Digital single setpoint control; single display shows actual temperature or setpoint.
Includes
- Thermocouple, line cord and plug.
Recommended for
- Ashing most types of organic and inorganic samples.
- Heat treating small steel parts.
- Performing ignition tests.
- Conducting gravimetric analysis.
- Determination of volatile and suspended solids.
Warranty
- 1 year.
Disclaimer to internal research use restriction
- Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.
Document
