Ideal for coal and coke ashing procedures.
Product Selection
Model Certifications / Compliance Control Capacity Electrical F6018 CSA Approved A1 0.5 cu. ft., 14L 208V 50/60Hz F6010 CSA Approved A1 0.5 cu. ft., 14L 240V 50/60Hz F6028C CSA Approved B1 0.5 cu. ft., 14L 208V 50/60Hz F6020C CSA Approved B1 0.5 cu. ft., 14L 240V 50/60Hz F6020C-33 CSA Approved | CE Marked B1 0.5 cu. ft., 14L 240V 50/60Hz F6028C-80 CSA Approved C1 0.5 cu. ft., 14L 208V 50/60Hz F6020C-33-80 CSA Approved | CE Marked C1 0.5 cu. ft., 14L 240V 50/60Hz F6020C-80 CSA Approved C1 0.5 cu. ft., 14L 240V 50/60Hz F6038CM CSA Approved D1 0.5 cu. ft., 14L 208V 50/60Hz F6030CM CSA Approved D1 0.5 cu. ft., 14L 240V 50/60Hz F6030CM-33 CSA Approved | CE Marked D1 0.5 cu. ft., 14L 240V 50/60Hz
Description
- Conduct industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis with Thermo Scientific Thermolyne Premium Large Muffle Furnaces.
Features
- Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity.
- Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit.
- Rear of the chamber incorporates a 0.95cm (0.38in.) dia. port for monitoring chamber temperatures with independent measuring devices.
- Optional stainlesssteel shelf doubles load capacity (maximum temperature of 900°C).
- Door safety switch stops power to heating elements when door opens.
- Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition.
- Furnaces with B1, C1, and D1 control also use a mechanical overtemperature protection relay.
Choice of Temperature Controllers
- A1: Digital single setpoint control; single display shows actual temperature or setpoint.
- B1: Digital single setpoint control with single ramp to setpoint and a dwell; single display shows actual temperature or setpoint.
- C1: Digital programmable control with one stored program of eight segments.
- D1: Digital programmable control with four stored programs, 16 segments per program and Controller includes RS-232 communications.
Includes
- Models F6010 and F6018 include a cord and plug set.
Requires
- All except Models F6010 and F6018 require a conduit connection.
Warranty
- 1 year.
Disclaimer to internal research use restriction
- Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.
Document
