Designed for efficient, high-temperature use with minimal maintenance.
Product Selection
Model Temperature Control Capacity Electrical BF51634C-1 Digital | Single Setpoint 0.6 cu. ft., 17L 208/240V 50/60Hz BF51634PBC-1 Digital | Single Setpoint | OTC 0.6 cu. ft., 17L 208/240V 50/60Hz BF51634PC-1 Multiprogram | Multisegment 0.6 cu. ft., 17L 208/240V 50/60Hz BF51634PBC-1 Digital | Single Setpoint | OTC 0.6 cu. ft., 17L 208/240V 50/60Hz BF51634PCOMC-1 Communication | Multiprogram | Multisegment 0.6 cu. ft., 17L 208/240V 50/60Hz BF51634PBCOMC-1 Communication | Multiprogram | Multisegment | OTC 0.6 cu. ft., 17L 208/240V 50/60Hz BF51664C-1 Digital | Single Setpoint 0.9 cu. ft., 25.5L 208/240V 50/60Hz BF51664PBC-1 Digital | Single Setpoint | OTC 0.9 cu. ft., 25.5L 208/240V 50/60Hz BF51664PC-1 Multiprogram | Multisegment 0.9 cu. ft., 25.5L 208/240V 50/60Hz BF51664PBC-1 Digital | Single Setpoint | OTC 0.9 cu. ft., 25.5L 208/240V 50/60Hz BF51664PCOMC-1 Communication | Multiprogram | Multisegment 0.9 cu. ft., 25.5L 208/240V 50/60Hz BF51664PBCOMC-1 Communication | Multiprogram | Multisegment | OTC 0.9 cu. ft., 25.5L 208/240V 50/60Hz
Description
- Heat to high temperatures faster using Thermo Scientific Lindberg/Blue M 1700°C furnaces.
- Designed for efficient, high-temperature use with minimal maintenance, these furnaces feature a unique door and control sophistication ranging from solid-state, single setpoint to more versatile microprocessor-based systems with programming and communications options.
- Choose from two popular chamber sizes.
- Not available in Europe.
Features
- Designed for efficient high-temperature use with minimal maintenance.
- Choice of single setpoint or programmable control.
- Side swing door provides full and easy access to chamber, protects user from heat surge.
- Atmosphere port, 0.375in. diameter, for fresh air or inert gas inlet (located at back wall, bottom).
- Solid-state power module with ammeter, circuit breaker, transformer and front panel indicator lights for “Ready Element” and “Main Power Applied”.
- Safety power disconnect switch cuts power to heating elements when door is opened.
- Moldatherm high-temperature ceramic fiber insulation with advanced graded design for fast heat-up and resistance to thermal shock.
- Moldatherm hearthplate supports load and protects chamber from spills or mishandling.
- High-volume cooling fans move air between inner and outer chamber to reduce exterior shell temperatures and improve energy efficiency and operator safety.
- Long-life type “B” thermocouples with 10ft. compensated lead wire and polarized plug for accurate high-temperature measurement.
- Removable panels for easy access to replaceable heating elements and thermocouples.
Smart Heating Elements
- Molybdenum disilicide elements with unique right-angle bend and sidewall mounting reduce maintenance usually associated with element termination and mounting.
- Designed for easy replacement without matching resistance values.
- Fast heat-up and recovery with excellent uniformity and energy efficiency.
- Increased resistance to thermal shock, ideal for rapid cycling over extended periods.
Overtemperature Control (OTC)†
- Adjustable digital overtemperature control protects furnace and load in the event of primary control circuit failure.
- Overrides main controller and shuts off power to furnace if high limit is reached.
- Manual reset required for safety.
- Operates via signal from independent thermocouple.
Programmable Controller With Communications (COM Models)
- With RS-485 data port (communications card and port) for connection to remote computer.
- Enables modification, interrogation and data transfer of instrument control and configuration parameters.
- Up to 30 units can be connected to one PC.
Digital Multiple Program, Multiple Segment Programmable Controller
- Microprocessor-based PID control (proportional, integral, derivative) prevents overshoot.
- Multiple programs and segments for ramp (up and down) and dwell (timed hold) temperature control.
- Simultaneous digital LED display of actual temperature vs. setpoint in either °C or °F.
Digital Single-Setpoint Controller
- Microprocessor-based PID control (proportional, integral, derivative) prevents overshoot.
- Single segment, single setpoint, one ramp to setpoint.
- Adjustable high limit overtemperature protection.
- Simultaneous LED display of actual temperature vs. setpoint in either °C or °F.
Ordering Information
- Required power cord, hardwiring not included.
- Software not included (available as an option).
- † Specify Option.
- B when ordering.
Requires
- Power cord, hardwiring wiring.
Recommended for
- Composite research.
- Precious and exotic metals treatment.
- High-temperature ceramic research.
- Powder metallurgy.
Document
