Thermo Scientific 50136169 Water GenPure xCAD Plus

$10,470.00

Switch & Pay via Wire Transfer? Enjoy 3.5% Off

  • 90 to 240 volts, 50/60 hertz — Brand-New + Direct / Drop Shipping¹ + Includes Warranty = from Thermo Scientific

Description

  • Gain flexibility in the lab with the new Thermo Scientific Barnstead GenPure xCAD Plus Ultrapure Water Purification System.
  • Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments.
  • This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality.
  • All consumables needed for start-up come with the system, allowing for simple ordering and setup.

Description

  • All GenPure systems exceed international standards ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW.

xCAD (Extended Control and Dispenser):

  • System provides more flexibility for ultrapure water dispensing with an action radius of 32" (80cm).
  • Ergonomic dispensing arm provides precise volume dosing at the press of a button.
  • Flexible dispenser offers positions including turned, height adjusted or extended toward your vessel.
  • One-of-a-kind design provides access to all system controls at your fingertips.

Simultaneously dispense from up to three dispensers:

  • Each system ships with a single xCAD Plus remote dispenser.
  • For increased flexibility, add one or two more xCAD Plus dispensers.

Integrated feed water monitoring:

  • Additional measuring cell monitors feed water conductivity.
  • If the quality of the feed water drops below the set value, a fault message will immediately be displayed.

Online TOC measurement with UV intensity monitoring (available on systems with optional TOC only):

  • Real-time TOC monitoring offers continual measurement of organic substances present in the water.
  • Continuous monitoring of UV intensity removes the risk of false TOC values due to diminished UV intensity.
  • Fault message alerts user when the UV lamp intensity is no longer sufficient for accurate TOC measurements.

UV Photo-oxidation 185/254 nm:

  • High performance UV assembly reliably reduces the content of microorganisms and their metabolites.
  • UV oxidation also reduces organic compounds in the water to ultra-low levels.

Leak detection:

  • An error message is displayed when internal leaks are detected.

Ready to use:

  • Feed water pressure switch, wall bracket, UV lamp, ultrapure cartridge, sterile filter, all are included in one part number.

Measurement of conductivity/resistivity:

  • Conductivity cells are carefully calibrated prior to each measurement via built-in reference resistance with cell constants at 0.01cm-1.
  • Temperature measurements are made by a platinum chip sensor with ± 0.1°C accuracy.

Quick-connect cartridge replacement:

  • Aquastop quick-connect capability enables cartridge replacement within seconds even mid-operation.

Exact dosing:

  • Electronic dosing yields fully automatic volume control of 0.01-65 L with ≤2% accuracy.

GLP-compliant documentation:

  • Real-time clock and code-protected operating system prevents unauthorized changes to system settings.
  • RS-232 interface with adjustable send-interval offers safe data transfer of all measured data, faults, date and time to a PC computer or log printer.
  • Digital microprocessor control automatically monitors and stores faults from the last four weeks.
  • USP-compliant conductivity measurement with temperature compensation can be switched on or off.

Warranty:

  • 1 year, parts and labor.

Specification

Product Size Each
Resistivity 18.2MO·cm at 25°C
Conductivity 0.055µS/cm
Flow Rate Up to 2L/min
Total Organic Carbon 1 to 5ppb
Endotoxin Concentration <0.001EU/mL
Bacterial Content <0.01 CFU/mL
Particles >0.2µM/mL <1
Feed Water Monitoring Integrated
Feedwater Connector 3/4 in.
Height (English) 24 in.
Height (Metric) 615mm
Width (English) 14.6 in.
Width (Metric) 372mm
Operating Pressure 0.1 to 6 bar
Voltage 90 to 240V
Hertz 50/60Hz
Temperature Range (Metric) 2° to 35°C
Depth (English) 13 in.
Depth (Metric) 330mm
Description Barnstead GenPure xCAD Plus UV/UF (wall version)
Model Barnstead GenPure xCAD Plus UV/UF (wall version)
Power Consumption 0.1kW
Electrical Requirements 90 to 240V 50/60Hz

Variation

Model Replacement Type Version Electrical Includes
50136152 GenPure xCAD Plus UV Bench 90 to 240V 50/60Hz System with UV lamp
50136170 GenPure xCAD Plus UV Bench 90 to 240V 50/60Hz System with UV lamp
50136153 GenPure xCAD Plus UV - TOC Bench 90 to 240V 50/60Hz System with UV lamp and TOC monitor
50136146 GenPure xCAD Plus UV/UF - TOC Bench 90 to 240V 50/60Hz System with UV lamp, ultrafiltration membrane and TOC monitor
50136151 GenPure xCAD Plus UV/UF Bench 90 to 240V 50/60Hz System with UV lamp and ultrafiltration membrane
50136149 50136152 GenPure xCAD Plus Wall 90 to 240V 50/60Hz System
50136165 50136170 GenPure xCAD Plus Wall 90 to 240V 50/60Hz System
50136169 GenPure xCAD Plus UV/UF Wall 90 to 240V 50/60Hz System with UV lamp and ultrafiltration membrane
50136172 GenPure xCAD Plus UV/UF - TOC Wall 90 to 240V 50/60Hz System with UV lamp, ultrafiltration membrane and TOC monitor
50136171 GenPure xCAD Plus UV - TOC Wall 90 to 240V 50/60Hz System with UV lamp and TOC monitor

Brochure

Thermo Scientific Barnstead GenPure xCAD Plus Ultrapure Water Purification Systems Product Brochure

You may also like…