Ideal for coal and coke ashing procedures.

Product Selection

Model Certifications / Compliance Control Capacity Electrical
F6018 CSA Approved A1 0.5 cu. ft., 14L 208V 50/60Hz
F6010 CSA Approved A1 0.5 cu. ft., 14L 240V 50/60Hz
F6028C CSA Approved B1 0.5 cu. ft., 14L 208V 50/60Hz
F6020C CSA Approved B1 0.5 cu. ft., 14L 240V 50/60Hz
F6020C-33 CSA Approved | CE Marked B1 0.5 cu. ft., 14L 240V 50/60Hz
F6028C-80 CSA Approved C1 0.5 cu. ft., 14L 208V 50/60Hz
F6020C-33-80 CSA Approved | CE Marked C1 0.5 cu. ft., 14L 240V 50/60Hz
F6020C-80 CSA Approved C1 0.5 cu. ft., 14L 240V 50/60Hz
F6038CM CSA Approved D1 0.5 cu. ft., 14L 208V 50/60Hz
F6030CM CSA Approved D1 0.5 cu. ft., 14L 240V 50/60Hz
F6030CM-33 CSA Approved | CE Marked D1 0.5 cu. ft., 14L 240V 50/60Hz

Description

Features

  • Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity.
  • Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit.
  • Rear of the chamber incorporates a 0.95cm (0.38in.) dia. port for monitoring chamber temperatures with independent measuring devices.
  • Optional stainlesssteel shelf doubles load capacity (maximum temperature of 900°C).
  • Door safety switch stops power to heating elements when door opens.
  • Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition.
  • Furnaces with B1, C1, and D1 control also use a mechanical overtemperature protection relay.

Choice of Temperature Controllers

  • A1: Digital single setpoint control; single display shows actual temperature or setpoint.
  • B1: Digital single setpoint control with single ramp to setpoint and a dwell; single display shows actual temperature or setpoint.
  • C1: Digital programmable control with one stored program of eight segments.
  • D1: Digital programmable control with four stored programs, 16 segments per program and Controller includes RS-232 communications.

Includes

  • Models F6010 and F6018 include a cord and plug set.

Requires

  • All except Models F6010 and F6018 require a conduit connection.

Warranty

  • 1 year.

Disclaimer to internal research use restriction

  • Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.

Document

Thermo Scientific Thermolyne Premium Large Muffle Furnace Product Brochure Product Brochure