Thermo Scientific FD1545M Thermolyne Furnace C1 2.2L | 0.08-cu ft

$3,570.00

Switch & Pay via Wire Transfer? Enjoy 3.5% Off

  • 120 volts, 50/60 hertz — Brand-New + Direct / Drop Shipping¹ + Includes Warranty = from Thermo Scientific

Description

  • Perform ultra-high temperature applications with the Thermo Scientific Thermolyne Industrial Benchtop Muffle Furnace, which reaches a maximum temperature of 1200°C.
  • Includes multiple safety features and choice of two temperature-control options; additionally, heavy-duty firebrick insulation surrounds the opening for added durability.

Features

  • Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat.
  • Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition.
  • Counter-weighted door swings upward, directing heat away from operator.
  • Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber.
  • Door safety switch protects operator by removing power to the heating elements upon opening the door.
  • Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices.
  • LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only).

Single-setpoint Controller (B1)

  • Single ramp to setpoint and a dwell.
  • Single display shows actual temperature or setpoint.

8-step Programmable Controller (C1)

  • Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes.
  • “Holdback” feature “holds” program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance.

Choice of Temperature Controllers

  • B1: Digital single setpoint control with single ramp to setpoint and a dwell; single display shows actual temperature or setpoint.
  • C1: Digital programmable control with one stored program of eight segments.

Includes

  • Oven, Platinel II thermocouple and a ceramic hearth plate to protect the bottom heating element.

Note

  • 120V models require fixed wiring and are not supplied with a power cord.

Warranty

  • 1 year.

Disclaimer to internal research use restriction

  • Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.

Specification

Product Size Each
Amperage 18.6A
Capacity (Metric) 2.2L
Certifications/Compliance All units cUL, UL listed; -33 units also CE marked.
Capacity 0.08 cu.ft., 2.2L
Capacity (English) 0.08 cu.ft.
Depth (English) Interior 9 in.
Depth (Metric) Interior 22.8cm
Dimensions (D x W x H) Interior 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5cm)
Dimensions (L x W x H) Exterior 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9cm)
Height (English) Exterior 16.5 in.
Height (English) Interior 3.75 in.
Height (Metric) Interior 9.5cm
Height (Metric) Exterior 41.9cm
Length (English) Exterior 18 in.
Hertz 50/60Hz
Length (Metric) Exterior 45.7cm
Power Consumption 2230w
Shipping Weight (English) 52 lb.
Shipping Weight (Metric) 23.5kg
Temperature Control Digital programmable 1 program/8 segments
Temperature Range (Metric) 100° to 1200°C
Type Multisegment
Single program
Voltage 120V
Width (English) Interior 4 in.
Width (English) Exterior 11
Width (Metric) Exterior 27.9
Electrical Requirements 120V 50/60Hz
Width (Metric) Interior 10.1cm

Variation

Model Power Consumption Control Capacity Electrical
FD1535M 2230w B1 0.08 cu. ft., 2.2L 120V 50/60Hz
FD1530M 2230w B1 0.08 cu. ft., 2.2L 240V 50/60Hz
FD1530M-33 1560w B1 0.08 cu. ft., 2.2L 240V 50/60Hz
FD1545M 2230w C1 0.08 cu. ft., 2.2L 120V 50/60Hz
FD1540M 2230w C1 0.08 cu. ft., 2.2L 240V 50/60Hz
FD1540M-33 1560w C1 0.08 cu. ft., 2.2L 240V 50/60Hz

Brochure

Thermo Scientific Thermolyne Industrial Benchtop Muffle Furnace Product Brochure Product Brochure

You may also like…