Thermo Scientific 50132196 Water LabTower TII 40 LPM

  • 100-240 volts, 50/60 hertz — Product is obsolete — Thermo Scientific has depleted all of its stock inventory

Description

  • Convert tap water into high-purity water with the Thermo Scientific Barnstead LabTower TII Water Purification System, a complete solution integrating purification and tank.
  • This high-tech system is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity.
  • Conserve bench space with this stand-alone design which includes an integrated 100L reservoir.
  • Castors allow for easy relocation within the lab.

Consistent water quality:

  • Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards.
  • The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity.

Compact mobile design:

  • Three system options are available with permeate flows of 20, 40 or 60L/hr.
  • Stand-alone design with integrated 100L reservoir takes up zero bench space.
  • Castors allow easy relocation.
  • Systems can be upgraded later to accommodate growing water demands.

Two ways to dispense water:

  • Dispense directly from the system via the dispensing valve for calibration solutions, reagent preparation, filling of containers, general rinsing purposes, etc.
  • Dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Integrated 100L reservoir:

  • Up to 100L of high purity water is ready for dispensing when needed.
  • High purity polypropylene reservoir is opaque to light.
  • Conical bottom allows complete emptying for efficient cleaning and disinfection.
  • Adjustable setting for reservoir volume can be programmed for times when demand is low, allowing you to only store water that you can use.

Clear information on system display:

  • The large four-line display is code-protected to prevent accidental changes in system settings.
  • Illuminated and easily readable, the display provides information on resistivity or conductivity and operating mode status, such as “roduction”, “stand-by” or sanitization and volume of the reservoir in percent.

GLP-compliant documentation:

  • LabTower TII has been developed to meet or exceed GLP requirements.
  • Recorded and traceable data can be obtained by print-out via the RS-232 interface and accessory printer.
  • Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.01 cm-1 to an accuracy of ±0.1°C.

Pretreatment:

  • 5µm prefilter and activated carbon in the combi-filter cartridge protect the RO membrane from free chlorine and particles.
  • Hardness stabilizing cartridge protects the reverse osmosis stage from hard water.

Reverse osmosis and reservoir:

  • Pretreated water is pressure-forced through the permeable reverse osmosis module removing 97- 99% of all inorganic ions and 99% of dissolved organic substances, as well as microorganisms and particles.
  • The built-in 100L reservoir has a conical bottom outlet to optimize cleaning and sanitization.

Ion exchange and UV:

  • RO membrane removes up to 99% of impurities.
  • All remaining ions are removed by the low TOC, high-purity resins in the ion exchange cartridge.
  • Irradiation with UV light (TII units with UV option only) eliminates any bacteria or germs that are present.

Specification

Product Size Each
Resistivity 10 to 1MO·cm
Conductivity 0.1 to 1.0µS/cm
Feedwater Source tap
Flow Rate 1.5L/min
Bacterial Content <1CFU/mL
Particles >0.2µM/mL <1
TOC Monitor with UV Intensity Monitoring No
Feed Water Monitoring No
Feedwater Connector 3/4 in. NPT
Feedwater Pressure 1-6 Bar
Height (Metric) 1500mm
Width (Metric) 450mm
Net Weight (Metric) 66kg
Operating Pressure 2 to 6 bar
Voltage 100-240V
Hertz 50/60Hz
Temperature Range (Metric) 2° to 35°C
Bacterial retention 99%
Depth (Metric) 580mm
Description Barnstead LabTower TII
Item Description LabTower TII 40 with 3L/min pump
Permeate performance 40L/hr. at 15°C
Electrical Requirements 100-240V 50/60Hz

Variation

Model Type Electrical Permeate performance Includes
50132191 Barnstead LabTower TII 20 100-240V 50/60Hz 20 L/hr at 15°C System
50132196 Barnstead LabTower TII 40 100-240V 50/60Hz 40 L/hr at 15°C System
50132141 Barnstead LabTower TII 40 UV 100-240V 50/60Hz 40 L/hr at 15°C System with UV lamp
50132393 Barnstead LabTower TII 60 230V 50Hz 60 L/hr at 15°C System

Brochure

Thermo Scientific Barnstead LabTower TII Water Purification Systems Product Brochure

You may also like…